Ding All Epoxy 24oz Set – 2x8oz Resin 1x8oz Hardener
Dings happen, and fixing them is never fun. But taking good care of your board means it will ride better and last longer. With this Ding All Epoxy Resin / Hardener Set you’ll be back in business. It’s specifically formulated to repair those pesky dings and comes out smooth and totally clear. Ding All helps you keep your board good as new!
Product Features
- One (1) Ding All Epoxy Resin / Hardener Set from Ding All
- Professionally fix the dings on your surfboard
- Helps your board ride better and last longer
){kind=link}
Comments
Leave a Reply
Recent Posts
- Pro Lite Surfboard Travel Bags Chasing Perfection For Over 40 Years #surfing #travelbag #surfliner
- POV SURFING PUMPING WAVES ON AN ASYMMETRICAL BOARD
- Mason Ho's first ever surf at Teahupoo 2020
- Why Norway Stops Surfing | Beaches Off Limits For Surfers Only
- Surfing the biggest waves at the best surf sites.
Recent Comments
- on POV SURFING PUMPING WAVES ON AN ASYMMETRICAL BOARD
- on POV SURFING PUMPING WAVES ON AN ASYMMETRICAL BOARD
- on Why Norway Stops Surfing | Beaches Off Limits For Surfers Only
- on Why Norway Stops Surfing | Beaches Off Limits For Surfers Only
- on Why Norway Stops Surfing | Beaches Off Limits For Surfers Only
Archives
- November 2024
- October 2024
- September 2024
- August 2024
- July 2024
- June 2024
- May 2024
- April 2024
- March 2024
- February 2024
- January 2024
- December 2023
- November 2023
- October 2023
- September 2023
- August 2023
- July 2023
- June 2023
- May 2023
- April 2023
- March 2023
- February 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- July 2022
- June 2022
- May 2022
- April 2022
- March 2022
- February 2022
- January 2022
- December 2021
- November 2021
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- February 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- February 2020
- January 2020
- December 2019
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- April 2019
- March 2019
- February 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- July 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- June 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
This was helpful to repair my epoxy waveski. If I had big holes to fill in, I would first put in some styrofoam so I could use less of the product, it would dry better, and I would keep my board as light as possible. It does drip, so if you don’t want drips you will likely have to sand when you are done. One of the bottles came with a broken cap so I had to use wax paper and a rubber band on the cracked cap on the one bottle. The ratio to use is 2 parts resin to one part hardener. The resin is…
It gets 2 stars because the stuff works. But it is incredibly hard to pour out of these bottles without spilling it or pouring out more than you intended. The epoxy or resin is then left running down the outside of the bottles. I spilled a lot of PART B, because it just ran down the bottle, leaving me with a large unusable portion of PART A. The stuff works, it’s just incredibly inconvenient. You have to use a scale to measure. I will not get this again. It looks like there are similar…